10 Facts about Rigging

Post On: May 27, 2017

Facts about Rigging tell us about a system of chains, cables and tops applied on the sailboat or sailing ship.  The presence of rigging enables the people to adjust the spars and sail position of a vessel. The vangs, sheets, and halyards are the running rigging in which it is attached. The stays and shrouds are included in the standing rigging. There are two classes of rigging. Both are the running rigging and standing rigging. If you want to know about it, check the post.

Facts about Rigging 1: the differences between the running and standing rigging

The running rigging is used to manage the reefing degree and sail orientation. On the other hand, the bowsprit and mast are applied in standing rigging.

Facts about Rigging 2: configuration

Rigging has a number of configurations. It may involve the square-rigged vessels or the fore-and-aft rigged vessels.

Facts about Rigging

Facts about Rigging

Facts about Rigging 3: the location of standing rigging

The standing rigging usually is located in the middle of the deck and a mast. The steel cable is mainly used for the standing rigging due to its function to hold the mast in its position.

Check Also: 10 Facts about Reddit

Facts about Rigging 4: the materials

Actually, the materials for running rigging and standing rigging were historically similar. However, the standing rigging was stronger due to the tar-coated material.

Rigging Facts

Rigging Facts

Facts about Rigging 5: the fore-and-aft rigged vessels

The standing riggings with the types of side stays, backstays and forestays are spotted on many fore-and-aft rigged vessels.

Facts about Rigging 6 the less common rigging

The jumpers and diamond stays are the less common configurations of rigging.

Related Article: 10 Facts about Removable Storage

Facts about Rigging 7: the parts of rigging

Can you mention the parts of rigging? They include swage terminals, swageless terminals, fail-safe wire rigging insulators and shackle toggle terminals.

Facts about Rigging 8: the sail orientation

The sheets and braces are used to control the sail orientation in respect to the wind.



Facts about Rigging 9: the materials for running rigging

Today, people use Kevlar, nylon, and Dacron to create the running rigging. In the past, Manilla rope was employed.

Read Also: 10 Facts about Railroads

Facts about Rigging 10: the common types of running rigging

The square-rigged vessels and fore-aft rigged vessels often employ for the varied uses of running rigging.  The major functions are related to the orientation, shape and support for the sail. The mechanism is available in a number of options depending on the design of rigging.

Do you like reading facts about rigging?